Model generations 991.1 & 991.2 Coupé & Cabriolet (2013–2019) | 3.8 B6 Twin‑Turbo (520 hp, 560 hp & 580 hp Turbo S) | Central Lock & 5x130 Widebody

Why is correct wheel fitment crucial for the Porsche 911 Turbo & Turbo S (991)?
The Porsche 911 Turbo and Turbo S (generations 991.1 and 991.2 Facelift) represent the pinnacle of everyday usability combined with supercar acceleration. Powered by the 3.8‑litre six‑cylinder boxer engine with twin turbochargers and variable turbine geometry (520 hp up to 580 hp in the 991.2 Turbo S), the 911 Turbo sends its power to the road via PTM all‑wheel drive and active rear‑axle steering. The 991 Turbo features the distinctive extremely wide Turbo‑Widebody hips with side intercooler intakes. Depending on specification the car uses the motorsport Porsche Central Lock (single centre wheel nut) system or the classic 5x130 five‑bolt pattern with a 71.6 mm hub bore and M14x1.5 wheel bolts. Factory‑fitted the 991 Turbo S runs on 20 inch forged Central Lock wheels (8.5J ET51 front / 11.5J ET56 rear with 245/35 R20 and 305/30 R20 N‑spec tyres). For aftermarket wheels (such as 9.0J front and 12.0J rear on 20 or 21 inch) spoke and barrel clearance around the massive 410 mm PCCB ceramic brakes is essential, combined with a carefully considered offset to protect the PTM all‑wheel drive system. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year and chassis number.
The values below represent the original factory parameters of the Porsche 911 Turbo & Turbo S (991.1 & 991.2). Use these as a technical reference when purchasing new wheels.
| Specification | Factory Value (OEM) | Notes & Advice |
|---|---|---|
| Bolt Pattern / Locking System | Porsche Central Lock (or 5x130 5-Bolt) | Central Lock standard on Turbo S (600 Nm). 5x130 with M14x1.5 bolts optional on base Turbo. |
| Hub Bore (CB) | 71.6 mm (for 5x130 version) | Standard Porsche hub bore for 5-bolt wheels. |
| OEM Wheel Sizes (20" Turbo Standard 5-Bolt) | Front: 8.5J x 20 ET51 Rear: 11.0J x 20 ET56 |
Factory 911 Turbo II alloy wheels on 5x130 bolt pattern. |
| OEM Wheel Sizes (20" Turbo S Central Lock Forged) | Front: 8.5J x 20 ET51 Rear: 11.5J x 20 ET56 |
Factory 911 Turbo S forged Central Lock wheels in staggered arrangement. |
| OEM Tyre Sizes | Front: 245/35 ZR20 Rear: 305/30 ZR20 |
Must be fitted with N‑Marking (N0 / N1 Pirelli P Zero / Michelin Pilot Sport 4S) with XL Load Index to protect PTM. |
Want to equip your Porsche 911 Turbo or Turbo S (991) with an even wider, concave stance or save weight using Flow Formed / Custom Forged wheels from brands like BBS (FI-R / CH-R II), HRE, Brixton Forged, Vossen, OZ Racing (Ultraleggera HLT CL), BC Forged or Maxton styling? Below are the ideal sizes for a scratch‑free fit, also for cars with PASM / PDCC suspension.
| Rim Diameter & Style | Position | Recommended Rim Width (J) | Ideal ET Value Range | Recommended Tyre Size |
|---|---|---|---|---|
| 20 Inch (OEM+ Flush Street Performance Sweet Spot) | Front Rear |
9.0J 11.5J / 12.0J |
ET45 - ET50 ET48 - ET52 |
245/35 R20 (or 255/35 R20) 305/30 R20 (or 315/30 R20) |
| 21 Inch (Exclusive Show Performance Wide Set) | Front Rear |
9.0J / 9.5J 12.0J |
ET42 - ET46 ET46 - ET50 |
255/30 R21 325/25 R21 |
| 20"/21" Inch (Staggered Diameter Wide Stance) | Front Rear |
9.0J 12.0J |
ET45 - ET48 ET46 - ET50 |
245/35 R20 325/25 R21 |
Want more background on fitting and track width for your Porsche 911 Turbo or Turbo S (991)?
In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension to 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Splitter / Bumper Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Tip (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and APK-compliance.
In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle data and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/TechArt exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered custom items, bespoke drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Porsche 911 Turbo or Turbo S (991), need advice on 410mm PCCB caliper clearance or Central Lock vs. 5x130 wheels, or would you like an all-in quote including workshop fitting in Nijkerk?