Wheel Fitment Guide - Toyota Yaris GRMN (XP130 1.8 Supercharged 212 hp)

Wheels Fitment Guide - Toyota Yaris GRMN (XP130 1.8 Supercharged 212 hp)

Model generation XP130 Limited Edition (2018) | 1.8 2ZR-FE Supercharged (212 hp / 250 Nm) | Torsen Limited Slip Differential & Sachs Performance Performance

Wheels Fitment Guide Toyota Yaris GRMN XP130 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Toyota Yaris GRMN (XP130)?
The Toyota Yaris GRMN (Gazoo Racing Masters of Nürburgring, produced in 2018 in a strictly limited run of only 400 units for Europe with an original new price of approximately € 44.900,-) is an exclusive collector's item. Powered by a unique 1.8-litre four-cylinder with a Magnusson Eaton supercharger (212 HP and 250 Nm torque), Sachs dampers, a Torsen mechanical limited-slip differential and a centre exhaust pipe, the GRMN is a bona fide circuit hot hatch. The Yaris GRMN uses the bolt pattern 4x108/4x100 (4x100 on the hub) with a 54.1 mm hub bore and M12x1.5 wheel bolts. Factory-fitted, the Yaris GRMN rides on ultra-light forged 17 inch matt black BBS multi-spoke wheels (7.0J ET42 with 205/45 R17 Bridgestone Potenza RE070 semi-slick tyres). The main technical fitment consideration is the factory-fitted white 4‑piston Gazoo Racing brake calipers and 275 mm perforated front brake discs. When selecting aftermarket or spare trackday wheels (such as 17x7.0J or 17x7.5J with ET38 to ET42) sufficient spoke clearance around the GR calipers is essential. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

The image below shows the original forged 17 inch BBS alloy wheel specially developed for the Toyota Yaris GRMN:

Original forged 17-inch matte black BBS alloy wheel from the Toyota Yaris GRMN

1. Factory specifications (OEM) Toyota Yaris GRMN XP130

The values below represent the original factory parameters of the Toyota Yaris GRMN (XP130 1.8 Supercharged). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 4x100 Classic Toyota 4‑bolt wheel circle on the XP130 platform.
Hub bore (CB) 54.1 mm Standard Toyota Yaris hub bore. Centre rings required for wheels with a larger hub bore (e.g. 67.1 mm or 73.1 mm).
Wheel attachment type M12 x 1.5 Conical Nuts Torque of 103 Nm recommended by Toyota Gazoo Racing.
OEM Wheel size (17" Forged BBS Black) 7.0J x 17 ET42 Factory 17 inch ultra-light forged BBS alloy wheels in a square setup.
OEM Tyre sizes 205/45 R17 Supplied on Bridgestone Potenza RE070 or Michelin Pilot Sport 4 with XL Load Index.

2. Aftermarket Fitment Guide (17" & 18" Yaris GRMN)

Would you like to equip your rare Toyota Yaris GRMN with a dedicated trackday wheelset, a wider stance or weight savings using Flow Formed wheels from brands such as OZ Racing (Ultraleggera / Alleggerita HLT / Formula HLT), Enkei (RPF1 / RPF1RS in 4x100), JR-Wheels (SL01 / JR11 / JR30), Sparco (Assetto Gara), Motec (Wizard), Autec, Remus, Milltek or Maxton Styling? Below are the ideal sizes for a scratch‑free fitment around the 4‑piston Gazoo Racing brakes.

Wheel diameter & construction Position Recommended rim width (J) Ideal ET value range Recommended tyre size
17 Inch (Lightweight Trackday / Circuit Sweet Spot) Front & Rear (Square) 7.0J / 7.5J ET38 - ET42 205/45 R17 (Semi‑slicks Nankang AR-1 / Cup 2 / Yokohama AD08RS)
17 Inch (OEM+ Flush Fast Road Setup) Front & Rear (Square) 7.5J ET35 - ET40 205/45 R17 (or 215/45 R17)
18 Inch (OEM+ Flush Show & Stance Setup) Front & Rear (Square) 7.5J ET38 - ET42 215/35 R18

3. Wheel Spacers & Fitting Specifications for Yaris GRMN

Would you like to push the original forged 17" BBS factory wheels (7.0J ET42) slightly further out to make them sit flush with the wheel arches?

  • Wheel Spacers (Spacers): On the original 7.0J ET42 factory wheels H&R or Eibach wheel spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 4x100 bolt pattern and 54.1 mm centre bore with extended M12x1.5 wheel studs.
  • 4-Piston Gazoo Racing Caliper Clearance: The Yaris GRMN is fitted up front with special white Gazoo Racing calipers. When selecting aftermarket wheels you must check that the spokes clear the front brake caliper. An ET value between ET38 and ET42 is ideal for 7.0J/7.5J wheels.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspensions to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Component / Operation Labour Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Fit & Balance € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Fit € 80 - € 120 45 - 60 minutes
Side Skirts Set Fit € 103 - € 145 60 - 90 minutes
Rear Diffuser Fit € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Fit € 55 - € 80 30 - 45 minutes
Sidebars Set Fit (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fit (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Terms

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with our own physical workshop in Nijkerk. We test, fit and inspect parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT-assurance.

How does the vehicle inspection and fitment guarantee from Wheels 'N Customs work?

In our webshop you filter parts by Brand, Model, Trim and Year (we deliberately avoid a licence-plate filter to prevent incorrect database matches). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Almost all our aluminium wheels, lowering kits from Eibach/H&R/KW, Remus/Milltek exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This ensures a trouble-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your online order within 14 days. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Brand/Type/Specification, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Toyota Yaris GRMN (XP130 1.8 Supercharged 212 pk), would you like advice on 4-piston Gazoo Racing brake caliper clearance, OZ Racing / BBS / Enkei wheels or track wideners, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl