Wheel Spacers: Safety, mm Calculation & Longer Wheel Bolts

Wheels 'N Customs Icon
WHEELS 'N CUSTOMS
FITMENT GUIDE: SPACERS, MEASURING & BOLT LENGTH CALCULATION

Wheel spacers (spacers) are commonly used to increase a car's track width and to make the wheels sit 'flush' (tight to the wheel arch). They also provide the perfect solution when new wheels or Big Brake Kits just do or do not clear the brake calipers or struts.

Wheel spacers or track wideners are frequently used to increase a car's track width and to achieve a ‘flush’ fitment (wheels aligned neatly with the wheel arch). They also provide the perfect solution when new wheels or Big Brake Kits just do — or just do not — clear the brake calipers or strut housings.

Fitting spacers often raises questions and concern about severe steering vibrations at 100 to 130 km/u and about wheel studs breaking. In this guide from Wheels 'N Customs we explain how to measure the exact clearance, what the difference is between universal discs and hubcentric spacers (naafcentrisch), and how to calculate the minimum thread engagement for longer wheel studs.

A common mistake is buying cheap, universal spacers without hub centring. See the overview below why the chosen system determines safety:

Spacer Type

Centring & Construction Vibration-free at 120 km/h? Applicable Advice Universal Flat Ring (3-5mm)
No centre lip, large elongated holes for multiple bolt patterns. No (High Risk) Not recommended (Cause: eccentric mounting) Hubcentric (Hubcentric System 1)
Precise hub diameter (CB) with collar/centre lip on the wheel side. 100% Excellent Recommended (5mm to 20mm) System 2 / DRA (Boltable)
Spacer is bolted to the hub; wheel is mounted onto the spacer. 100% Excellent Recommended for thicknesses > 20mm 2. Thread Length Calculation for Extended Wheel Studs

2. Thread Length Calculation for Extended Wheel Studs

If you fit a pass-through spacer (for example 10 mm or 15 mm), the original wheel studs may become too short. To prevent a wheel coming loose while driving, the legal standard is at least 6.5 to 8 full turns of thread engagement.

Original Stud Shank Length (mm) + Thickness of the Spacer (mm) = New Required Shank Length

Original Stud Shank Length (mm) + Thickness of the Spacer (mm) = New Required Shank Length

Worked example VW Golf 7 (Original stud M14x1.5 = 27 mm shank): When fitting a 12 mm spacer you require studs with a shank length of exactly 27 mm + 12 mm = 39 mm (rounded to the nearest standard size 38 mm or 40 mm). Also pay attention to the correct seat type: Conical 60° for aftermarket wheels vs. Ball-conical (R12/R13) for factory wheels!

Step 1: Use a Ruler or Spirit Level

Place a spirit level or straight batten vertically against the outer edge of the fender going downwards.

Step 2: Measure Distance to Outside of Tyre

Use calipers or a ruler to measure the distance from the inside of the batten to the bulge/sidewall of the tyre. For safety, always subtract 2 to 3 mm for suspension travel margin.

Certified Spacer Brands at Wheels 'N Customs:

Certified Spacer Brands at Wheels 'N Customs:

  • Eibach Pro-Spacer: Wear-resistant anodised hubcentric spacers
  • JR-Wheels Spacers: High-precision fitments including wheel bolt kits
  • ST Suspensions Spacers: With interchangeable plastic adapter systems
  • System X PCD Adapters: For adapting the bolt pattern (PCD)
  • Extended Wheel Studs & Locking Bolts: Hardened 10.9 steel in Black and Silver
  • Extended Wheel Studs & Wheel Locks: Hardened 10.9 steel in Black and Silver

Professional Spacer Fitting & Fitment Check in Nijkerk

Would you like wheel spacers fitted without the risk of steering vibrations or damaged wheel hubs? In our workshop in Nijkerk we thoroughly clean and de-rust the wheel hub with wire brushes, fit the precisely fitting hub-centric spacers, and tighten the extended wheel bolts to the prescribed torque (Nm).

Need advice on the correct spacer thickness or bolt length?

Our fitment experts calculate the safe dimensions instantly based on your car model and wheel specifications.

 

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl