Model generation Type 348 (2016-2020) | 1.4 MultiAir Turbo (170 hp / 250 Nm) | Mechanical Limited Slip Differential & Record Monza Exhaust

Why is correct wheel fitment crucial for the Abarth 124 Spider?
The Abarth 124 Spider (Type 348 generation, produced between 2016 and 2020 with an original new price of approximately € 41.000,- to € 44.500,-) is the Italian, spicy interpretation of the rear‑wheel‑drive two‑seater roadster. Powered by the characterful 1.4‑litre MultiAir turbo engine with 170 hp and 250 Nm, a roaring Record Monza exhaust, Bilstein shock absorbers and a mechanical limited‑slip differential, the 124 Spider is a superb driver's car. The Abarth 124 Spider uses the 4x100 bolt pattern with a 54.1 mm centre bore and M12x1.5 wheel bolts. From the factory the 124 Spider rides on 17 inch Forgiato Grey alloy wheels (7.0J ET45 with 205/45 R17 Bridgestone Potenza S001 tyres). The most important fitment aspect is the factory‑fitted red 4‑piston Brembo brake calipers at the front. When selecting aftermarket JDM or Italian wheels (such as 17x7.5J or 18x7.5J/8.0J with ET35 to ET42) sufficient spoke clearance is required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year of manufacture and chassis number.
The values below represent the original factory parameters of the Abarth 124 Spider (Type 348 1.4 MultiAir Turbo). Use these as technical reference when purchasing new wheels or wheel spacers.
| Specification | Factory Value (OEM) | Notes & Advice |
|---|---|---|
| Pitch Circle Diameter (PCD) | 4x100 | Classic 4-bolt PCD on the Type 348 RWD platform. |
| Centre Bore (CB) | 54.1 mm | Standard Mazda / Abarth 124 hub bore. Hub-centric rings required for wheels with a larger centre bore (e.g. 67.1 mm or 73.1 mm). |
| Wheel Fixing Type | M12 x 1.5 Conical Bolts | A tightening torque of 110 Nm recommended by Abarth Officine. |
| OEM Wheel Sizes (17" Standard Forgiato Grey) | 7.0J x 17 ET45 | Factory 17-inch anthracite grey alloy wheels in a square setup. |
| OEM Tyre Sizes | 205/45 R17 | Supplied on Bridgestone Potenza S001 or Michelin Pilot Sport 4 with XL Load Index. |
Do you want to fit your Abarth 124 Spider with a wider track, a sportier stance or weight savings using Flow Formed wheels from brands such as OZ Racing (Ultraleggera / Alleggerita HLT / Formula HLT), JR-Wheels (JR11 / JR21 / JR30 / SL01 in 4x100), Enkei (RPF1), Sparco (Assetto Gara), Motec (Wizard), Autec, Record Monza, Ragazzon or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW V1/V3 coilovers.
| Wheel Diameter & Construction | Position | Recommended Wheel Width (J) | Ideal ET Range | Recommended Tyre Size |
|---|---|---|---|---|
| 17 Inch (Lightweight Road & Track Sweet Spot) | Front & Rear (Square) | 7.0J / 7.5J | ET35 - ET42 | 205/45 R17 (or 215/45 R17) |
| 17 Inch (Aggressive Wide Trackday Setup) | Front & Rear (Square) | 8.0J | ET35 - ET38 | 215/45 R17 (or 225/45 R17 Semi-slicks) |
| 18 Inch (OEM+ Flush Show & Stance Setup) | Front & Rear (Square) | 7.5J / 8.0J | ET35 - ET40 | 215/40 R18 (or 225/35 R18) |
Do you want to push the original 17" Abarth factory wheels (7.0J ET45) slightly further out to make them sit flush with the arches?
In our spacious and professional workshop in Nijkerk we fit wheels, exhausts, bodykits and suspension on 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):
| Part / Labour | Labour Rate (Excl. VAT) | Indicative Fitment Time |
|---|---|---|
| Complete Wheel Set Mounting & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Bumper Lip / Splitter Installation | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Installation | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Installation | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Lip Installation | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Installation (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Installation (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, giving you 100% fitment guarantee, manufacturer warranty and MOT certainty.
In our webshop you filter parts by Make, Model, Variant and Year (we deliberately do not use a registration number filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Ragazzon/Record Monza exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Abarth 124 Spider (Type 348 1.4 MultiAir Turbo 170 hp), would you like advice on 4-piston Brembo caliper clearance, OZ Racing / JR-Wheels wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?