Model generations F83 SUV & Sportback (2019-present) | 2.5 TFSI 5‑Cylinder Turbo (400 hp) | Edition 10 Years & Quattro

Why is correct wheel fitment crucial for the Audi RS Q3 & RS Q3 Sportback (F3)?
The Audi RS Q3 F3 is the definitive model in the compact Performance SUV segment. Powered by the iconic 400 HP 2.5 TFSI 5‑cylinder turbo engine, the RS Q3 combines an imposing presence with serious performance. The car uses the 5x112 bolt pattern with a 57.1 mm centre bore on the MQB‑Evo platform. From the factory the RS Q3 sits on wide 20 inch or 21 inch wheels (8.5J ET38). When selecting aftermarket alloy wheels the spoke clearance around the large 375 mm steel or 380 mm RS Carbon Ceramic 6‑piston calipers is of primary importance, together with sufficient load rating. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year of manufacture and chassis number.
The values below represent the original factory parameters of the Audi RS Q3 and RS Q3 Sportback F3. Use these as technical reference when purchasing new wheels or spacers.
| Specification | Factory value (OEM) | Notes & Advice |
|---|---|---|
| Bolt pattern (PCD) | 5x112 | Standard VAG 5‑lug bolt circle on the MQB platform. |
| Centre bore (CB) | 57.1 mm | VAG centre bore. Hub rings required for larger wheel bore sizes (e.g. 66.5 mm or 73.1 mm). |
| Wheel fasteners type | M14 x 1.5 Ball conical bolts | 140 Nm tightening torque recommended by Audi Sport. |
| Minimum load rating | 750 kg - 850 kg per wheel | Required due to the SUV unladen weight and maximum axle loads. |
| OEM Wheel Sizes (20" Standard) | 8.5J x 20 ET38 | Factory 10-spoke star-design RS alloy. |
| OEM Wheel Sizes (21" Performance / 10 Years) | 8.5J x 21 ET38 | Factory 5-V-spoke trigone or Edition 10 Years double-spoke wheels. |
| OEM Tyre Sizes | 255\/40 R20 (on 20") / 255\/35 R21 (on 21") | Mandatory fitted with RO1 / RO2 (Audi Sport OEM) and XL Load Index. |
Do you want to give your Audi RS Q3 or RS Q3 Sportback F3 a tighter filling of the wheel arches, a deep concave look or weight savings with Flow Formed / Forged wheels from brands like Concaver, JR-Wheels, Rotiform, Vossen, BC Forged, ABT or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when lowered with Eibach, H&R or KW coilovers.
| Wheel Diameter | Recommended Rim Width (J) | Ideal ET-Value Range | Recommended Tyre Size | Fitment Characteristic |
|---|---|---|---|---|
| 20 Inch (OEM+ Winter / Comfort Setup) | 8.5J / 9.0J | ET30 - ET35 | 255/40 R20 | Moves the wheel 5 to 8 mm further outwards for a fuller appearance. |
| 21 Inch (Absolute Sweet Spot Performance Street) | 9.0J | ET30 - ET33 | 255\/35 R21 (or 265\/35 R21) | The most chosen size. Fills the widened wheel arches tightly and flush. |
| 21 Inch (Aggressive Wide Show Stance) | 9.5J | ET30 - ET33 | 265/35 R21 | Maximum visual presence with deep concavity. 100% scratch-free on the standard suspension. |
Do you want to push the original 20" or 21" RS wheels (8.5J ET38) a bit further out to make them sit flush with the fender flares?
In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars. We use transparent fixed rates (excl. VAT):
| Part / Labour | Fitting Rate (Excl. VAT) | Indicative Fitting Time |
|---|---|---|
| Complete Wheel Set Fitment & Balancing | € 75 - € 115 | 45 - 60 minutes |
| Front Spoiler / Lip / Splitter Fitment | € 80 - € 120 | 45 - 60 minutes |
| Side Skirts Set Fitment | € 103 - € 145 | 60 - 90 minutes |
| Rear Diffuser Fitment | € 95 - € 145 | 45 - 75 minutes |
| Roof Spoiler Extension / Boot Spoiler Fitment | € 55 - € 80 | 30 - 45 minutes |
| Sidebars Set Fitment (Commercial Vehicles / SUV) | € 145 - € 185 | 60 - 90 minutes |
| Bullbars Fitment (Commercial Vehicles / Pickups) | € 141 - € 190 | 60 - 90 minutes |
| Exhaust Connection (Axle-back / Cat-back) | € 128 - € 268 | 60 - 150 minutes |
Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and APK (MOT) assurance.
In our webshop you filter parts by Make, Model, Variant and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists perform a manual check based on your vehicle data and chassis number. If there is any doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.
Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a trouble-free APK inspection in the Netherlands and vehicle inspection in Belgium.
Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, bespoke drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking costs of 25% to 40% may apply for inspection and repackaging.
Do you have specific questions about the exact fitment for your Audi RS Q3 or RS Q3 Sportback (F3), would you like advice about RS brake caliper clearance or load capacity of SUV wheels, or would you like an all-in quote including workshop fitting in Nijkerk?