Wheels Fitment Guide - Audi RS6 Avant GT (C8 630 hp)

Wheels Fitment Guide - Audi RS6 Avant GT (C8 630 hp)

Model generation C8 Limited (2024-present, 660 units) | 4.0 V8 TFSI BiTurbo (630 hp / 850 Nm) | IMSA GTO Heritage Carbon GT & RS Coilover Suspension

Wheels Fitment Guide Audi RS6 Avant GT C8 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Audi RS6 Avant GT (C8)?
\r\nThe Audi RS6 Avant GT (C8 generation) is the absolute pinnacle in Audi Sport’s history and the ultimate form of the RS6 Performance. Limited worldwide to exactly 660 units, the RS6 GT is directly inspired by the legendary 1989 Audi 90 IMSA GTO race car. Powered by the 630 hp and 850 Nm 4.0‑litre BiTurbo V8 with sport differential, the GT features a manually adjustable RS coilover suspension (lowered by 10 mm), carbon fibre bonnet, vented front fenders and a dual roof spoiler. The car uses the VAG bolt pattern 5x112 with a 66.5 mm hub bore and M14x1.5 wheel bolts. Factory‑fitted, the RS6 GT runs on specific 22 inch 6‑spoke GT wheels (10.5J ET19 in high‑gloss white, black or gold with Continental SportContact 7 Silent 285/30 R22 tyres). Because the RS6 GT is standard equipped with solid 440 mm RS Ceramic Carbon discs with red 10‑piston calipers up front, it places extremely high demands on spoke and barrel clearance of aftermarket wheels. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Audi RS6 Avant GT C8

The values below represent the original factory parameters of the Audi RS6 Avant GT (C8). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x112 Standard VAG 5-lug bolt circle on the MLB-Evo platform.
Centre Bore (CB) 66.5 mm Large VAG MLB-Evo hub bore. Use hubcentric rings when fitting wheels with a larger centre bore (e.g. 73.1 mm).
Wheel Fastening Type M14 x 1.5 Ball Conical Bolts Torque of 160 Nm recommended by Audi Sport.
OEM Wheel Sizes (22" RS6 GT Special Forged) 10.5J x 22 ET19 Factory 22-inch 6‑arm forged GT wheels in High-Gloss White, Gloss Black or Neodyme Gold.
OEM Tyre Sizes 285/30 R22 Supplied on Continental SportContact 7 with ContiSilent noise damping and XL load index (RO1 Audi Sport spec).

2. Aftermarket Fitment Guide (22" & 23")

Do you want to give your Audi RS6 Avant GT C8 a tighter fill of the wide RS wheel arches, a dedicated winter setup, or weight reduction with custom forged wheels from brands like Concaver, JR-Wheels, Rotiform, Veemann, Vossen, ABT Sportsline, Urban Automotive, BC Forged or Maxton-styling? Below are the ideal sizes for a scratch-free fit, also when using the factory coilover/screw-set suspension.

Wheel Size & Construction Position Recommended Rim Width (J) Ideal ET Range Recommended Tyre Size
22 Inch (OEM+ Winter / Performance Setup) Front & Rear (Square) 10.5J / 11.0J ET15 - ET20 285/30 R22
22 Inch (Absolute Sweet Spot Street Performance) Front & Rear (Square) 10.5J / 11.0J ET12 - ET18 285/30 R22 (or 295/30 R22)
23 Inch (Aggressive Deep Concave Show Stance) Front & Rear (Square) 10.5J / 11.0J ET12 - ET18 285/25 R23 (or 295/25 R23)

3. Wheel Spacers & Bolt-Pattern Adapters for RS6 Avant GT

Do you want to push the original 22" GT factory wheels (10.5J ET19) slightly further out so they sit flush with the carbon-fibre wheel arch extensions?

  • Spacers: On the original 10.5J ET19 factory wheels, H&R or Eibach spacers from 10 mm to 12 mm can be fitted at the front and 12 mm to 15 mm at the rear. Use only hub‑centric aluminium spacers with the specific 66.5 mm hub fitment and extended M14x1.5 wheel bolts.
  • Bolt-Pattern Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 5x112 to 5x120)? Bolt-pattern adapters can accommodate this, but they have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the overall ET in advance to prevent the wide tyres from contacting the wheel arch during compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Operation Labour Rate (Excl. VAT) Indicative Labour Time
Complete Wheel Set Fitting & Balancing € 75 - € 115 45 - 60 minutes
Front Lip / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lid Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-movers"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and check the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer's warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year of Manufacture (we deliberately do not use a licence plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Capristo/ABT/Milltek exhaust systems and Maxton Design bodykits have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered custom items, bespoke drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking costs of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Audi RS6 Avant GT (C8 630 hp), would you like advice on 440mm RS Ceramic caliper clearance, factory bolt-set settings or wheel spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl