Wheels Fitment Guide: BMW 1 Series F20 / F21 (2011-2019)

Wheels Fitment Guide: BMW 1 Series F20 / F21 (2011-2019)

The Ultimate Technical Wheel & Suspension Guide for the BMW F20 / F21

Want to outfit your BMW 1 Series (F20 5-door or F21 3-door, from 116i up to M140i) with a neat staggered kit, spacers or a lowering kit? In this official guide from Wheels 'N Customs you’ll find all factory specifications, 18 and 19 inch staggered combinations, M-Performance caliper clearance and lowering advice.

Why is accurate fitment essential on the BMW F20 / F21?
The F20/F21 is the last generation 1 Series with rear-wheel drive (or xDrive). BMW uses relatively narrow wheel arches on the rear axle combined with high factory ET values (up to ET52 at the rear). If you choose an aftermarket rear wheel with too low an ET value (e.g. ET30 or ET35 from a 3 Series F30), the wheel will stick out too far and the tyre will rub on the inner arch edge when the suspension compresses.

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the BMW 1 Series F20/F21 (Pre-LCI & LCI Facelift, including M-Sport, M135i & M140i):

Specification Factory Value (OEM) Expert Note
Bolt Pattern (PCD) 5x120 Classic BMW 5-lug bolt pattern.
Centre Bore (CB) 72.6 mm Standard BMW centre bore fitment. Use hub rings when fitting wheels with larger centre bores (> 72.6 mm).
OEM Wheel Sizes 16, 17, 18 and 19 Inch 16"-17" (Urban/Sport Line), 18" (OEM M-Sport staggered set 436M), 19" (M Performance 405M / 624M).
OEM ET Value Range ET43 (Front) / ET52 (Rear) Factory 7.5Jx18 ET45 front and 8.0Jx18 ET52 rear on the M135i/M140i.
Wheel Fastening M14 x 1.25 Conical (60°) BMW uses M14x1.25 conical wheel bolts on the F-platform.
Torque Value 140 Nm Clean and torque accurately to 140 Nm with a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

BMW drivers choose a 'staggered setup' (staggered kit) for the F20/F21 in large numbers. See the recommended aftermarket combinations:

Size Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch (Square Setup) 18x8.0J (Front & Rear) ET42 - ET45 225/40 R18 Comfortable, neutral steering behaviour, tyres can be rotated between axles.
18 Inch (Staggered M-Sport) Front: 18x8.0J
Rear: 18x9.0J
Front: ET40 - ET43
Rear: ET48 - ET52
Front: 225/40 R18
\r\n\t\t\tRear: 245/35 R18 or 255/35 R18
Most Popular M135i/M140i Choice! Maximum traction on the rear axle, 100% rub-free.
19 Inch (Wideset Performance) Front: 19x8.0J
\r\n\t\t\tRear: 19x9.0J
Front: ET40 - ET43
\r\n\t\t\tRear: ET48 - ET52
Front: 225/35 R19
\r\n\t\t\tRear: 245/30 R19 or 255/30 R19
Golden Middle Ground for Shows! Visually fills the wheel arches very neatly.

3. Wheel Spacers, Bolt Pattern Adapters & Lowering Advice

The BMW 1 Series F20/F21 sits a little high at the rear from the factory. With the right track width and lowering kit the car gets the recognisable sporty 'M' look.

  • Wheel Spacers (Spacers): Are you running the original M-Sport 18" or 19" wideset (ET45 front / ET52 rear)? With a spacer set of 12 mm per side at the front and 15 mm per side at the rear the factory wheels will sit exactly flush with the bodywork. Use only hub-centred spacers (72.6 mm) and extended M14x1.25 wheel bolts!
  • Lowering (Eibach Pro-Kit / H&R / Bilstein B12 / KW V1-V3): A drop of 25 mm to 35 mm significantly improves steering response. With an 18" or 19" wideset with ET42 front and ET50 rear the wheel arch remains rub-free even at full compression.
  • Bolt Pattern Adapters (5x120 to 5x112): Want to fit newer BMW G-series wheels (which use the 5x112 bolt pattern)? With custom-made adapters from 5x120 to 5x112 (minimum 15 mm thick) this is possible. Pay attention to the reduction in ET value caused by the adapter thickness.

4. Frequently Asked Questions (FAQ)

Do 19 inch wideset wheels rub on a lowered M135i or M140i?
No, provided the ET value of the rear 9.0J wheel is at least ET48 to ET52 combined with a 245/30 R19 or 255/30 R19 tyre. A lower ET value on the rear axle (for example ET35) will inevitably cause rubbing against the plastic inner wing lip on the F20/F21.
Do 17 and 18 inch wheels fit over the M-Sport braking system (blue calipers)?
The M135i, M140i and models with the optional blue M-Sport brakes have 340 mm or 370 mm front discs. 17 inch wheels only fit if the rim barrel has sufficient inner diameter (usually specific OEM 17" M-wheels or 18" are recommended). Not all aftermarket 17" wheels provide enough spoke clearance (brake clearance).
Do I need to use conical wheel bolts with a set of aftermarket wheels?
Yes! Both factory and aftermarket wheels for the BMW F20/F21 use 60° conical M14x1.25 wheel bolts. When fitting wheels with spacers ensure the thread engagement is extended exactly by the thickness of the spacer (e.g. 28 mm standard + 12 mm spacer = 40 mm thread length).

Have Your Fitment Checked By The Experts

If you are unsure about the correct ET value for your F20/F21 wideset, want to know if your dream wheels will fit over your M-Sport brakes or need advice on xDrive-compatible tyre sizes, contact the fitment specialists at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl