Wheels Fitment Guide - BMW M135i & M140i (F20 / F21)

Wheels Fitment Guide - BMW M135i & M140i (F20 / F21)

Model generations F20 (5-door) & F21 (3-door) Hatchback (2012-2019) | 3.0 Turbo N55 (320/326 hp) & B58 (340 hp) | Rear-wheel drive & xDrive

Wheels Fitment Guide BMW M135i M140i F20 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the BMW M135i & M140i (F20 / F21)?
The BMW M135i and M140i (F20/F21) occupy a unique place in car history as the last compact hot hatches fitted with a longitudinal 3.0-litre six-cylinder turbo engine with rear-wheel drive (or optional xDrive). The car uses BMW’s familiar bolt pattern 5x120 with a 72.6 mm centre bore and M14x1.25 wheel bolts. From the factory BMW delivers the M135i/M140i on a narrow wheel set with high offsets (7.5J ET45 front / 8.0J ET52 rear on 18 inch M Double-spoke Styling 436M). Because the F20 wheel arches are measured relatively tight at the rear, choosing wider alloy wheels (such as 8.5J or 9.0J on the rear axle) requires a very precisely calculated offset (ET40-ET45) to avoid rubbing on the arch edges. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) BMW M135i & M140i F20 / F21

The values below represent the original factory parameters of the BMW M135i and M140i (F20 / F21). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 5x120 Classic BMW 5-lug bolt pattern on the F20/F21 platform.
Hub Diameter (CB) 72.6 mm Standard BMW hub bore. Centre rings required for larger wheel hub holes (e.g. 74.1 mm).
Wheel Fastening Type M14 x 1.25 Bolts Conical 60-degree seat. Tightening torque of 140 Nm.
OEM Wheel Sizes (18" Standard Wideset Styling 436M) Front: 7.5J x 18 ET45
Rear: 8.0J x 18 ET52
Factory M Double-spoke Ferric Grey / Orbit Grey alloy wheels.
OEM Wheel Sizes (19" M Performance Styling 405M / 624M) Front: 7.5J x 19 ET45
Rear: 8.0J x 19 ET52
Factory M Performance lightweight forged wheels.
OEM Tyre Sizes Front: 225/40 R18 (225/35 R19 on 19")
Rear: 245/35 R18 (255/30 R19 on 19")
Mandatory to have Star-Mark (* BMW OEM) and XL Load Index (especially on xDrive).

2. Aftermarket Fitment Guide (18" & 19")

Do you want to give your BMW M135i or M140i a fuller fill of the wheel arches, a sportier stance or weight savings with Flow Formed / Custom Forged wheels from brands like Concaver, JR-Wheels (SL01 / JR11 / JR30), Apex (ARC-8 / EC-7), Motec, Borbet, OZ Racing or Maxton Styling? Below are the ideal sizes for scratch-free fitment, even when lowered with Eibach, H&R or KW coilovers.

Wheel Diameter & Construction Position Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size
18 Inch (OEM+ Flush Street & Track Wideset) Front
Rear
8.0J
8.5J / 9.0J
ET40 - ET42
ET42 - ET45
225/40 R18
245/35 R18 (or 255/35 R18 on 9.0J)
18 Inch (Trackday Apex Square Setup) Front & Rear (Square) 8.5J ET38 - ET42 235/40 R18 (Requires slight negative camber at the front)
19 Inch (Absolute Sweet Spot Performance Show Wideset) Front
Rear
8.0J / 8.5J
8.5J / 9.0J
ET40 - ET42
ET42 - ET45
225/35 R19
255/30 R19

3. Wheel Spacers & Bolt Pattern Adapters for BMW M135i / M140i F20

Do you want to push the original 18" Styling 436M factory wheels (7.5J ET45 front / 8.0J ET52 rear) slightly further out to make them flush with the arches?

  • Wheel Spacers: On the original factory wheels H&R or Eibach spacers of 10 mm to 12 mm at the front and 12 mm to 15 mm at the rear can be fitted. Use only hub-centric aluminium spacers with the specific 72.6 mm hub fitment and extended M14x1.25 wheel bolts.
  • Bolt Pattern Adapters & Fitment Check: Are you looking at an exclusive custom wheelset with a different bolt pattern (e.g. 5x120 to 5x112)? Bolt pattern adapters accommodate this, but have a minimum thickness of 15 mm to 20 mm. Our fitment specialists in Nijkerk calculate the total ET in advance to prevent wide rear tyres from contacting the wheel arches under compression at speed.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we daily fit wheels, exhaust systems, bodykits and suspension on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Labour Rate (Excl. VAT) Indicative Fitting Time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Splitter / Bumper Lip / Splitter Fitting € 80 - € 120 45 - 60 minutes
Side Skirts Set Fitting € 103 - € 145 60 - 90 minutes
Rear Diffuser Fitting € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Fitting € 55 - € 80 30 - 45 minutes
Sidebars Set Fitting (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Fitting (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust outlet (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT assurance.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Variant and Year of manufacture (we deliberately do not use a licence-plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Remus/Milltek/Akrapovi? exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially ordered bespoke items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Make/Model/Variant restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about exact fitment for your BMW M135i or M140i (F20 / F21), would you like advice on M Sport caliper clearance or xDrive rolling circumference requirements, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl