Wheels Fitment Guide - Ford Ranger Raptor

Wheels Fitment Guide - Ford Ranger Raptor

Model generations 2019-2022 (2.0 Bi-Turbo EcoBlue 213 hp) & 2022-present (3.0 V6 EcoBoost 292 hp) | FOX Live Valve suspended Pick-up

Wheels Fitment Guide Ford Ranger Raptor Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Ford Ranger Raptor?
The Ford Ranger Raptor is the undisputed king among high-performance off-road pick-ups. Equipped with extremely long suspension travel thanks to FOX 2.5 Live Valve shock absorbers and wide built-up wheel arches, the Raptor demands specific wheel parameters. The vehicle uses the robust 6-stud bolt pattern 6x139.7 with a 93.1 mm centre bore. Factory-fitted the Raptor runs on 17 inch wheels (8.5J ET55). When choosing aftermarket All-Terrain or Off-Road wheels (such as Fuel Off-Road, Black Rhino, Delta 4x4, Method Race Wheels or JR-Wheels JR42) a lower offset (ET20-ET35) is popular to make the wheels sit strong and flush. Additionally, a very high load capacity (minimum 950 kg per wheel) is strictly required. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

1. Factory specifications (OEM) Ford Ranger Raptor

The values below represent the original factory parameters of the Ford Ranger Raptor (2.0 EcoBlue & 3.0 V6 EcoBoost). Use these as a technical reference when purchasing new wheels or spacers.

Specification Factory value (OEM) Notes & Advice
Bolt pattern (PCD) 6x139.7 Standard heavy-duty 6-stud bolt circle on the Ranger Raptor platform.
Centre bore (CB) 93.1 mm Ford pick-up centre bore. Hub-centric rings required for larger wheel hub holes (e.g. 106.1 mm or 110.1 mm).
Wheel Fixing Type M12 x 1.5 Wheel Nuts Conical 60-degree Heavy Duty nuts. Tightening torque of 135 Nm.
Minimum Load Capacity Minimum 950 kg per wheel Mandatory due to the pick-up unladen weight (2,450 kg) and off-road loading.
OEM Wheel Sizes (17" Off-Road Standard) 8.5J x 17 ET55 Factory Dyno Grey 6-twin-spoke alloy wheels.
OEM Tyre Sizes 285/70 R17 Supplied on BFGoodrich All-Terrain T/A KO2 with reinforced carcass construction.

2. Aftermarket Fitment Guide (17", 18" & 20")

Do you want to give your Ford Ranger Raptor an even tougher, wider All-Terrain look or save weight with Heavy-Duty wheels from brands such as Fuel Off-Road, Black Rhino, Delta 4x4, Method Race Wheels, JR-Wheels (JR42), Borbet CWD or Pedders/Maxton styling? Below you will find the ideal sizes for a scratch-free fit, even with tight compression travel during off-road use.

Wheel diameter & construction Position Recommended Wheel Width (J) Ideal ET Value Range Recommended Tyre Size
17 Inch (Pure Off-Road & Overland Sweet Spot) Front & Rear (Square) 8.5J / 9.0J ET25 - ET35 285/70 R17 (or 315/70 R17 on a lifted suspension)
18 Inch (Absolute All-Round Street & Off-Road) Front & Rear (Square) 8.5J / 9.0J ET25 - ET35 285/65 R18 (or 295/60 R18)
20 Inch (Aggressive Wide Street Pickup Stance) Front & Rear (Square) 9.0J / 9.5J ET18 - ET25 285/55 R20 (or 305/50 R20 with wide arch extensions)

3. Wheel Spacers & Bolt Pattern Adapters for Ford Ranger Raptor

Do you want to push the original 17" factory wheels (8.5J ET55) a bit further out so they sit flush with the wide plastic wheel arch extensions?

  • Wheel Spacers (Spacers): On the original 8.5J ET55 factory wheels H&R or Eibach wheel spacers of 25 mm to 30 mm can be fitted all around. Use only hub-centric aluminium spacers with the specific 93.1 mm hub bore and reinforced M12x1.5 studs.
  • Bolt Pattern Adapters & Fitment Check: Do you have an exclusive custom wheel set in mind with a different bolt pattern (e.g. 6x139.7 to 6x114.3 or 5x120)? Bolt pattern adapters accommodate this, but have a minimum thickness of 25 mm to 30 mm. Our fitment specialists in Nijkerk will pre-calculate the total ET value to prevent the wide All-Terrain tyres from contacting the inner guards at maximum FOX suspension travel.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we install wheels, exhaust systems, bodykits and suspensions on 2 to 5 cars daily. We use transparent fixed rates (excl. VAT):

Part / Service Labour Rate (Excl. VAT) Indicative Installation Time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Installation € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Spoiler Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV / Pick-up) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Connection (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, manufacturer warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Make, Model, Version and Year (we deliberately do not use a licence plate filter to avoid incorrect database links). After you place your order our specialists carry out a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for the MOT?

Yes. Virtually all our alloy wheels, lowering/raising kits from Eibach/H&R/Pedders, Milltek/Remus exhaust systems and bodykits from Maxton Design/Rival have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted sets with tyres. When returning incorrectly ordered items without prior verification of Make/Model/Version, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about the exact fitment for your Ford Ranger Raptor, would you like advice on Heavy-Duty All-Terrain wheels or load-bearing requirements, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl