Wheels Fitment Guide: Mercedes-Benz CLA C117 / X117 (2013-2019)

Wheels Fitment Guide: Mercedes-Benz CLA C117 / X117 (2013-2019)

The Ultimate Technical Wheel & Suspension Guide for the CLA C117 & X117

Want to fit your Mercedes-Benz CLA Coupé (C117) or CLA Shooting Brake (X117) with a sleek set of aftermarket wheels, spacers or a lowering kit? In this official guide from Wheels 'N Customs you will find all factory specifications, 18 and 19 inch aftermarket margins, AMG caliper clearance and lowering advice.

Why is accurate fitment essential for the CLA C117 / X117?
\r\nThe first generation Mercedes CLA sits on the MFA1 platform and is characterised by a fairly sharp ingress angle of the wheel arches. Factory-fit ET values are quite high (ET48 - ET52). If you choose an ET that is too low (e.g. ET30), the wheels will stick out too far, which can lead to rubbing on the inner wheel arch during compression.

1. Original Factory Specifications (OEM Fits)

The OEM specifications below apply to the Mercedes CLA Coupé C117 and Shooting Brake X117 (Urban, AMG Line & CLA 45 AMG):

Specification Factory Value (OEM) Expert Note
Bolt Pattern (PCD) 5x112 Standard Mercedes-Benz 5-lug bolt pattern.
Centre Bore (CB) 66.6 mm Standard Mercedes centre bore; use centring rings for larger hub bores (> 66.6 mm).
OEM Wheel Sizes 17, 18 and 19 Inch 17" (Urban/Style), 18" (AMG Line 5-double-spoke), 19" (CLA 45 AMG / Night Edition).
OEM ET Range ET48 - ET52 Factory 7.5Jx18 ET52 / 8.0Jx19 ET48 wheels sit neatly within the arches.
Wheel Fastening M14 x 1.5 Ball Conical (R14) Note: OEM wheels use ball-conical bolts. Aftermarket wheels almost always require 60° conical bolts!
Tightening Torque 130 Nm Tighten to the correct prescribed torque with a calibrated torque wrench.

2. Aftermarket Fitment Guide (What fits safely?)

Want the wheel to sit tighter in the arch ('flush fitment') without the tyres rubbing on steering lock? See the recommended sizes:

Size Wheel Width (J) Ideal ET Value Recommended Tyre Size Fitment Character
18 Inch 18x8.0J ET42 - ET45 225/40 R18 Excellent ride comfort, direct steering response, ideal for winter sets.
19 Inch 19x8.5J ET42 - ET45 225/35 R19 or 235/35 R19 Golden Standard! Fits beautifully against the arch, no rubbing on a lowered setup.
20 Inch 20x8.5J ET45 235/30 R20 Exclusive stance & show look. Visually maximally filled.

3. Wheel Spacers, Hub Adapters & Lowering Advice

You can transform the stance and appearance of the Mercedes CLA C117 / X117 with a subtle drop combined with the correct track width.

  • Wheel Spacers (Spacers): Are you running the original AMG Line 18" or 19" wheels (ET48-ET52)? With a spacer set of 10 mm to 12 mm per side at the front and 12 mm to 15 mm per side at the rear, the factory wheels will sit perfectly flush with the body. Use only hub-centred spacers (66.6 mm) and extended M14x1.5 wheel bolts!
  • Lowering (Eibach Pro-Kit / H&R / KW): The CLA has a sporty roofline from the factory, but it sits a little high on its wheels by default. Lowering with Eibach Pro-Kit or H&R lowering springs (25-30 mm) preserves ride comfort. Combined with a 19x8.5J ET45 wheel setup, fitment remains 100% rub-free.
  • Hub Adapters: Want to fit wheels with a different bolt pattern (such as BMW's 5x120 or the 5x114.3 used by Japanese brands)? This is possible with custom hub adapters at least 15 mm thick. Remember that the effective ET of the wheel decreases by the thickness of the adapter.

4. Frequently Asked Questions (FAQ)

Do 19 inch wheels rub on a lowered Mercedes CLA C117 / X117?
No, provided you choose the recommended specification of 19x8.5J with an ET of ET42 to ET45 paired with 225/35 R19 or 235/35 R19 tyres. Even with a 30 mm drop this wheel and tyre combination remains completely rub-free in the wheel arches.
How do I know if an aftermarket wheel fits over the brakes of a CLA 45 AMG?
The CLA 45 AMG has large 4-piston AMG brake calipers at the front. Wheels with a deep lip or heavily inturned spokes often contact the side of the caliper. Choose wheels with a domed or open spoke profile and, if in doubt, have brake clearance checked in advance by our fitment specialists.
Do I need to use conical wheel bolts with new aftermarket wheels?
Yes! Mercedes-Benz factory wheels use ball-conical (R14) bolts. Almost all aftermarket wheel manufacturers (such as Concaver, JR-Wheels, Rotiform, Borbet, GMP) use a 60° conical bolt seat. Fitting factory bolts to conical aftermarket wheels can cause damage or wheel loosening.

Have Your Fitment Checked By The Experts

Unsure about the correct ET, want to know if your dream wheels clear the CLA 45 AMG brakes, or seeking advice on a suitable lowering kit for your CLA Coupé or Shooting Brake? Contact the experts at Wheels 'N Customs in Nijkerk directly.

Ask Our Experts For Advice

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl