Wheels Fitment Guide - Porsche 911 GT3 & GT3 RS (991)

Wheels Fitment Guide - Porsche 911 GT3 & GT3 RS (991.1 / 991.2)

Model generations 991.1 & 991.2 Coupé (2013-2019) | 3.8 & 4.0 Naturally Aspirated Flat-six B6 (475 hp, 500 hp & 520 hp GT3 RS) | Central Lock Motorsport

Wheels Fitment Guide Porsche 911 GT3 RS 991 Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Porsche 911 GT3 & GT3 RS (991)?
The Porsche 911 GT3 and GT3 RS (Generations 991.1 and 991.2 Facelift) represent the purest expression of Porsche Motorsport for road use. Powered by the high-revving 9,000 rpm naturally aspirated 3.8L or 4.0L six-cylinder boxer engine (475 HP up to 520 HP on the GT3 RS), the 991 GT3 series places extreme demands on weight savings, wheel strength and fitment. The GT3 and GT3 RS use the unique Porsche Central Lock (central wheel nut) system with a fixed torque of 600 Nm. Factory, the 991 GT3 rides on 20 inch forged Central Lock wheels (9.0J ET55 front / 12.0J ET47 rear with 245/35 R20 and 305/30 R20 N-spec tyres). The wider 991 GT3 RS uses a motorsport staggered diameter setup: 20 inch at the front (9.5J ET50 with 265/35 R20) and 21 inch at the rear (12.5J ET48 with 325/30 R21). For aftermarket or trackday wheels from brands such as BBS, Manthey Racing or OZ Racing, spoke and barrel clearance around the solid 380 mm / 410 mm PCCB ceramic brakes is of primary importance. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Variant, Year of manufacture and chassis number.

1. Factory specifications (OEM) Porsche 911 GT3 & GT3 RS (991)

The values below represent the original factory parameters of the Porsche 911 GT3 & GT3 RS (991.1 & 991.2). Use these as a technical reference when purchasing new Central Lock wheels.

Specification Factory Value (OEM) Notes & Advice
Pitch Pattern / Locking Porsche Central Lock (Central Wheel Nut) Motorsport central nut. Tightening torque of 600 Nm with special Porsche grease.
Hub & Locking System Porsche Central Lock Hub Integrated locking pin. Requires special tools and ramps for disassembly.
OEM Wheel Sizes (20" GT3 Standard 991.1 / 991.2) Front: 9.0J x 20 ET55
\r\n Rear: 12.0J x 20 ET47
Factory GT3 forged aluminium Central Lock wheels.
OEM Wheel Sizes (20"/21" GT3 RS Staggered Diameter) Front: 9.5J x 20 ET50
\r\n Rear: 12.5J x 21 ET48
Factory GT3 RS forged lightweight or magnesium wheels (Weissach Package).
OEM Tyre Sizes (GT3 20" / GT3 RS 20"/21") GT3: 245/35 ZR20 (Front) / 305/30 ZR20 (Rear)
\r\n GT3 RS: 265/35 ZR20 (Front) / 325/30 ZR21 (Rear)
Must be fitted with N-Marking (N0 / N1 / N2 Michelin Pilot Sport Cup 2 / Dunlop Sport Maxx Race) with XL Load Index.

2. Aftermarket Fitment Guide (20" GT3 & 20"/21" GT3 RS)

Do you want to fit your Porsche 911 GT3 or GT3 RS (991) with weight-saving ultra-light Forged / Magnesium Central Lock wheels from brands such as BBS (FI-R Central Lock), Manthey Racing, OZ Racing (Ultraleggera HLT CL), HRE, Brixton Forged or BC Forged? Below are the ideal sizes for scratch-free fitment, including track use.

Model & Inch Size Construction Position Recommended Rim Width (J) Ideal ET Value Range Recommended Tyre Size
991 GT3 (20 Inch Circuit & Track Sweet Spot) Front
\r\n Rear
9.0J / 9.5J
12.0J
ET50 - ET55
\r\n ET44 - ET47
245/35 R20 (or 255/35 R20 Cup 2R)
\r\n 305/30 R20 (or 315/30 R20)
991 GT3 RS (20"/21" Motorsport Sweet Spot) Front
\r\n Rear
9.5J
12.5J
ET48 - ET52
\r\n ET46 - ET48
265/35 R20 (Michelin Pilot Sport Cup 2 N2)
\r\n 325/30 R21 (Michelin Pilot Sport Cup 2 N2)
991 GT3 RS (19"/20" Full Circuit Trackday Setup) Front
\r\n Rear
9.5J
12.0J / 12.5J
ET48 - ET52
\r\n ET44 - ET48
265/35 R19 (Slick / Semi-Slick fitment over steel brakes)
\r\n 325/30 R20

3. Hub Spacers & Central Lock Provisions for 991 GT3 / RS

Would you like more background on the installation and track width of your Porsche 911 GT3 or GT3 RS (991)?

  • No Conventional Hub Spacers: On Porsche Central Lock hub systems it is NOT possible to fit traditional hub spacers due to the unique central locking mechanism and the integrated locking pins. A wider track width is achieved exclusively with custom-made Custom Forged Central Lock wheels with specifically calculated ET values.
  • Maintenance & Tightening Torque: Fitting and removing the Central Lock wheel nuts requires an approved torque wrench up to at least 600 Nm and a second person to depress the brake pedal. The splines must be cleaned and re-greased after every track day with official Porsche Castrol Optimoly TA grease.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we mount wheels, exhaust systems, bodykits and suspension daily on 2 to 5 cars. We apply transparent fixed rates (excl. VAT):

Part / Labour Mounting Rate (Excl. VAT) Indicative Mounting Time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Installation € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tip (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box-shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle check and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a licence-plate filter to avoid incorrect database links). After placing your order our specialists perform a manual check based on your vehicle details and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or fitted.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Manthey Racing/Capristo exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a worry-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the terms for withdrawal and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your order within 14 days for online purchases. Excluded from the right of withdrawal are specially made-to-order items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without a prior check of Brand/Model/Version, restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about exact fitment for your Porsche 911 GT3 or GT3 RS (991), would you like advice on 410mm PCCB brake clearance or Central Lock BBS/Manthey wheels, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl