Wheels Fitment Guide - Renault Clio R.S. 200 EDC & RS 220 Trophy (BH98)

Wheels Fitment Guide - Renault Clio R.S. 200 EDC & R.S. 220 Trophy (BH98)

Model generation BH98 (2013-2019) | 1.6 Turbo 4-Cylinder (200 hp / 220 hp Trophy - 280 Nm) | Cup Chassis Hydraulic Compression Stops

Wheels Fitment Guide Renault Clio R.S. 200 220 Trophy Wheels N Customs Nijkerk Logo

Why is correct wheel fitment crucial for the Renault Clio R.S. 200 EDC & R.S. 220 Trophy?
The Renault Clio R.S. (Generation BH98, produced from 2013 to 2019 with an approximate new price of € 28.000,- to € 35.000,-) is an icon in the French hot-hatch market. Powered by the fiery 1.6-litre M5Mt turbocharged engine paired with the EDC 6-speed dual-clutch gearbox (200 HP in the standard R.S. and 220 HP in the R.S. 220 Trophy), this driver's car places specific demands on wheel sizes. Unlike the regular Clio IV, the Clio R.S. uses the sporty bolt pattern 5x114.3 with a 66.1 mm centre bore and M12x1.5 wheel bolts. Factory wheels on the Clio R.S. are 17 inch (7.5J ET55 with 205/45 R17) or 18 inch alloys (7.5J ET55 Radical wheels on the Trophy with 205/40 R18 Michelin Pilot Super Sport tyres). When selecting lightweight aftermarket wheels (such as 7.5J or 8.0J on 17 or 18 inch with ET40 to ET48), the high factory ET (ET55) is reduced slightly. This perfectly fills the flared R.S. arches and integrates seamlessly with Akrapovi? exhaust systems and Maxton Design front splitters. At Wheels 'N Customs in Nijkerk we check every order in advance based on your selected Make, Model, Trim, Year and chassis number.

The image below shows an original light-alloy wheel from the Renault Clio RS 220 Trophy, illustrating the specific factory style and brake caliper clearance:

Original black alloy wheel of the Renault Clio R.S. 220 Trophy

1. Factory Specifications (OEM) Renault Clio R.S. 200 / 220 Trophy

The values below represent the original factory parameters of the Renault Clio R.S. 200 EDC and RS 220 Trophy (BH98). Use these as a technical reference when purchasing new wheels or wheel spacers.

Specification Factory Value (OEM) Notes & Advice
Bolt Pattern (PCD) 5x114.3 Sporty 5-bolt pattern on the Renault Sport platform.
Centre Bore (CB) 66.1 mm Standard Renault / Nissan centre bore. Hub rings required for wheels with a larger centre bore (e.g. 73.1 mm).
Wheel Fixing Type M12 x 1.5 Conical Bolts Tightening torque of 110 Nm recommended by Renault Sport.
OEM Wheel Sizes (17" Standard R.S. Tibor) 7.5J x 17 ET55 Factory 17 inch silver or dark grey alloy wheels in a square setup.
OEM Wheel Sizes (18" Trophy Radicale) 7.5J x 18 ET55 Factory 18 inch black/polished alloy wheels specific to the RS 220 Trophy.
OEM Tyre Sizes 205/45 R17 (on 17") / 205/40 R18 (on 18") Supplied on Dunlop Sport Maxx RT or Michelin Pilot Super Sport (on Trophy) with XL load index.

2. Aftermarket Fitment Guide (17" & 18" Clio R.S.)

Do you want to give your Renault Clio R.S. a wider track, a more aggressive Cup-stance or save weight with Flow Formed wheels from brands like JR-Wheels (SL01 / JR11 / JR30), Concaver, OZ Racing (Ultraleggera / Alleggerita HLT), Motec (Ultralight), Autec (Wizard), Rotiform, Veemann, Vossen, Borbet, Sparco or Maxton-styling? Below you’ll find the ideal sizes for a scratch-free fit, also when lowering with Eibach Pro-Kit, H&R or KW V3 coilovers.

Wheel Diameter & Construction Position Recommended Wheel Width (J) Ideal ET Range Recommended Tyre Size
17 Inch (Trackday / Winter Setup) Front & Rear (Square) 7.5J / 8.0J ET42 - ET48 205/45 R17 (or 215/45 R17)
18 Inch (OEM+ Flush Street Performance Sweet Spot) Front & Rear (Square) 7.5J / 8.0J ET42 - ET48 205/40 R18 (or 215/40 R18)
18 Inch (Aggressive Fast Road / Circuit Setup) Front & Rear (Square) 8.0J ET40 - ET45 215/40 R18 (Semi-slicks Nankang NS-2R / Cup 2)

3. Wheel Spacers & Fitment Determinations for Clio R.S.

Do you want to push the original 17" or 18" R.S. factory wheels (7.5J ET55) slightly further out to make them sit flush with the arches?

  • Wheel Spacers (Spacers): On the original 7.5J ET55 factory wheels, H&R or Eibach spacers of 12 mm to 15 mm can be fitted at the front and 15 mm to 18 mm at the rear. Use only hub-centric aluminium spacers with the specific 5x114.3 bolt pattern and 66.1 mm centre bore with extended M12x1.5 wheel bolts.
  • Rolling Circumference & Tyre Choice: Fitting 215/40 R18 tyres on an 8.0J wheel gives the Clio R.S. additional mechanical grip when exiting high-speed corners, without disrupting the electronic RS Differential (R.S. Diff) or the ABS/ESP systems.

4. Fixed Labour Rates Workshop Nijkerk

In our spacious and professional workshop in Nijkerk we fit wheels, exhaust systems, bodykits and suspension to 2 to 5 cars daily. We apply transparent fixed rates (excl. VAT):

Part / Labour Labour Rate (Excl. VAT) Indicative Fitment Time
Complete Wheel Set Mounting & Balancing € 75 - € 115 45 - 60 minutes
Front Spoiler / Bumper Lip / Splitter Installation € 80 - € 120 45 - 60 minutes
Side Skirts Set Installation € 103 - € 145 60 - 90 minutes
Rear Diffuser Installation € 95 - € 145 45 - 75 minutes
Roof Spoiler Extension / Boot Lip Installation € 55 - € 80 30 - 45 minutes
Sidebars Set Installation (Commercial Vehicles / SUV) € 145 - € 185 60 - 90 minutes
Bullbars Installation (Commercial Vehicles / Pickups) € 141 - € 190 60 - 90 minutes
Exhaust Tip (Axle-back / Cat-back) € 128 - € 268 60 - 150 minutes

5. Frequently Asked Questions & Legal Provisions

Why choose Wheels 'N Customs instead of online "box shifters"?

Many e-commerce shops act purely as intermediaries without a physical workshop in Nijkerk or technical expertise. Wheels 'N Customs combines a webshop catalogue of more than 250,000 items with its own physical workshop in Nijkerk. We test, fit and inspect the parts ourselves on a daily basis, which gives you 100% fitment guarantee, factory warranty and MOT certainty.

How does Wheels 'N Customs' vehicle inspection and fitment guarantee work?

In our webshop you filter parts by Brand, Model, Version and Year (we deliberately do not use a license-plate filter to avoid incorrect database mappings). After placing your order our specialists perform a manual check based on your vehicle data and chassis number. If in doubt we will ask you within 48 hours via WhatsApp or e-mail for 1 to 2 photos of your brakes or wheel arches. Only after 100% approval will your order be processed or installed.

Are our fitted wheels and parts approved for inspection?

Yes. Virtually all our alloy wheels, lowering kits from Eibach/H&R/KW, Akrapovi?/Milltek/Remus exhaust systems and bodykits from Maxton Design have official German TÜV, ECE or ABE certification. This guarantees a hassle-free MOT in the Netherlands and vehicle inspection in Belgium.

What are the conditions for cancellation and returns (Directive 2011/83/EU)?

Under the European Directive 2011/83/EU you have the right to withdraw your online purchase within 14 days. Excluded from the right of withdrawal are specially made-to-measure items, custom-drilled wheels (Custom ET/Blank) and fitted tyre-and-wheel sets. When returning incorrectly ordered items without prior verification of Brand/Model/Version restocking fees of 25% to 40% may apply for inspection and repackaging.

Contact Us / Request Advice

Do you have specific questions about exact fitment for your Renault Clio R.S. 200 EDC or RS 220 Trophy, want advice on 18 inch JR-Wheels / OZ Racing wheels or spacers, or would you like an all-in quote including workshop fitting in Nijkerk?

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl