Wheels Fitment Guide: Toyota GT86 / GR86 & Subaru BRZ (2012-Present)
Why is precise fitment essential on the GT86 / GR86 / BRZ?
This lightweight rear-wheel-drive coupe is built around the Subaru chassis with a 5x100 PCD. From the factory the ET values of the narrow 7.0J/7.5J wheels are very high (ET48). If you fit a wide aftermarket wheel at the front (e.g. 8.5J or 9.0J) with too high an ET value, the inner face of the wheel will contact the strut. On models with the optional Brembo brake system (Performance Pack) the calipers also protrude significantly.
1. Original Factory Specifications (OEM Fits)
The following OEM specifications apply to the Toyota GT86 (ZN6), GR86 (ZN8) and Subaru BRZ (ZC6 / ZD8):
| Specification |
Factory Value (OEM) |
Expert Note |
| PCD (Bolt Pattern) |
5x100 |
Classic Subaru 5-lug bolt pattern. |
| Centre Bore (CB) |
56.1 mm |
Standard Subaru centre bore; use centring rings for larger bore sizes (> 56.1 mm). |
| OEM Wheel Sizes |
17 and 18 Inch |
17" (7.0Jx17 ET48 GT86/BRZ), 18" (7.5Jx18 ET48 GR86 / BRZ TS). |
| OEM ET-Value |
ET48 |
Factory ET keeps the narrow wheels set deep within the wheel arches. |
| Wheel Fixing |
M12 x 1.25 Conical (60°) |
Note: Uses the fine M12x1.25 thread (Subaru seat)! |
| Tightening Torque |
120 Nm |
Tighten to the correct specified torque with a calibrated torque wrench. |
2. Aftermarket Fitment Guide (What fits safely?)
Want the wheel to sit more flush in the arch without the tyres rubbing during spirited cornering? See the recommended sizes:
| Size |
Wheel Width (J) |
Ideal ET Value |
Recommended Tyre Size |
Fitment Character |
| 17 Inch (Lightweight Track) |
17x8.0J / 17x9.0J |
ET35 - ET40 |
225/45 R17 or 245/40 R17 |
Circuit Favourite! Retains the playful balance, lower unsprung weight (Enkei / Rota / Japan Racing). |
| 18 Inch (Street / Flush) |
18x8.5J / 18x9.5J |
ET38 - ET40 |
225/40 R18 or 235/40 R18 |
Golden Standard! Fill the wheelarch beautifully, extremely clean appearance. |
| 19 Inch (Show & Stance) |
19x8.5J |
ET38 - ET42 |
225/35 R19 |
Exclusive stance look. Visually maximised fill, very clean lip. |
3. Spacers, Hub Adapters & Lowering Advice
The Toyota GT86, GR86 and Subaru BRZ are known for their pure driving feel, but with targeted upgrades the car gets an even sharper stance and handling.
- Spacers: Do you run the original 17" or 18" factory wheels (ET48)? With a spacer set of 15 mm per side at the front and 20 mm per side at the rear the factory wheels sit exactly flush with the body. Use only hub-centric spacers (56.1 mm) and longer M12x1.25 wheel studs or DRM systems!
- Lowering (Eibach Pro-Kit / H&R / KW V1-V3 / BC Racing / Tein): A lowering kit or coilover (25 mm to 40 mm) significantly lowers the already low centre of gravity. When fitting a wide 18x9.5J ET38 wheel at the front a coilover with narrower springs is recommended to ensure internal clearance at the strut.
- Hub Adapters (5x100 to 5x114.3): Because the 5x114.3 bolt pattern offers many more options in wide motorsport wheels, adapters are often chosen. Custom adapters of at least 15 mm thickness convert the bolt pattern. When choosing the wheel, take the reduced effective ET into account.
4. Frequently Asked Questions (FAQ)
Will 18x8.5J ET38 wheels rub on a lowered GT86 / GR86 / BRZ?
No, provided you choose the recommended sizing of 18x8.5J with an ET value of ET38 to ET42 paired with 225/40 R18 or 235/40 R18 tyres. Even with a 30 mm drop using lowering springs or coilovers this combination remains rub-free in the arches.
Do aftermarket wheels fit straight over the optional Brembo calipers (Performance Pack)?
Not all wheels fit straight away. The red 4-piston Brembo calipers protrude significantly. Wheels with a flat or strongly inward-curving spoke profile can interfere. Proven wheels with sufficient spoke clearance (brake clearance) such as the Enkei RPF1 (specific sizes), JR-Wheels JR11/JR3, Sparco Assetto Gara and OZ Ultraleggera do fit without rubbing.
Do I need specific wheel nuts for new aftermarket wheels?
Yes! Pay close attention to the thread pitch. GT86, GR86 and BRZ use M12x1.25 wheel nuts with a 60° conical seat. Never use M12x1.5 nuts (as on most other Toyotas), as that will damage the thread of the wheel studs!
Have Your Fitment Checked By The Experts
Unsure about the correct ET, want to know if your dream wheels will clear your Brembo calipers or looking for advice on a suitable lowering kit for your GT86, GR86 or BRZ? Contact the experts at Wheels 'N Customs in Nijkerk directly.
Ask Our Experts For Advice