The Tesla Model Y is indisputably one of the most advanced and popular electric crossovers on European roads. Still, almost every owner — from the Standard Range RWD to the Long Range and Performance — shares the same major frustration: the stiff, unsettled and bouncy factory suspension. Short imperfections, paving, manhole covers and speed bumps are transmitted unfiltered to the body and seats, while at higher speed the car can feel nervous and exhibit after‑motion on undulating asphalt.
In the workshop of Wheels 'N Customs in Nijkerk we fit the definitive solution from the German suspension specialist KW Automotive: the KW V3 Leveling coilover. This specific comfort suspension is not developed for extreme lowering, but purely for maximum ride comfort, harmonious damping and preserving the practical everyday usability of your Tesla.
To understand why the Model Y feels so firm, we must look at Tesla’s factory design assumptions:
With a curb weight of just over 2,000 kg the suspension has to absorb enormous forces. Tesla opted for stiff springs and a simple valving setup to reduce body roll in corners, which comes at the expense of smooth absorption.
The original dampers cannot separate fast compression over small ridges (high-speed damping) from slow body movements. This causes the car to feel both harsh over ridges and floaty on undulating tarmac.
Fitting lowering springs alone does not solve the comfort issue; it shortens suspension travel and places even greater strain on the original stiff dampers. A complete damper-and-spring upgrade is technically necessary.
| Feature / Specification | KW V3 Leveling Comfort | Original Tesla Factory Suspension |
|---|---|---|
| Primary Focus | Optimal Ride Comfort & Chassis Composure | Tight factory setup / Compromise |
| Ride Height / Ground Clearance | 0 to 20 mm adjustable (retains original height) | Fixed factory height |
| Damping Technology | TVR-A & TVC-A (Independent Bump & Rebound) | Standard non-adjustable twin-tube dampers |
| Rebound Adjustability (Outgoing) | 16 Precise Clicks (controls body motion) | Not adjustable |
| Bump Adjustability (Incoming) | 12 Precise Clicks (absorbs imperfections) | Not adjustable |
| Damper Housing Material | 100% Stainless Steel (KW Inox-Line) | Painted sheet steel (susceptible to surface corrosion) |
| Speed Bumps & Parking Garages | 100% Clearance (no risk to battery tray) | Standard clearance |
| TÜV Approval & Warranty | Includes TÜV Teilegutachten & GOCA certificate | Factory specification |
The secret of the transformation lies in KW’s patented multi-stage valving technology:
When the wheel rolls over a ridge or manhole cover, incoming damping determines how quickly the strut compresses. KW Leveling immediately opens an additional high-speed oil channel as soon as a hard impact occurs.
The result: the shock is absorbed by the damper instead of being transmitted to the chassis and your spine.
Outgoing damping controls how quickly the spring extends after being compressed. On the original suspension, poor rebound control causes the familiar ‘after-oscillation’ and lateral rocking on the motorway.
With 16 adjustable clicks our fitters can perfectly tune chassis composure to your personal driving style and wheel size (19, 20 or 21 inch).
Many Tesla owners hesitate with traditional lowering kits for fear of scraping the expensive battery pack:
The Model Y’s battery pack sits in the floor section between the axles. With an aggressive traditional drop of 40–50 mm the risk of bottoming out in steep parking garages or on high speed bumps increases significantly.
The KW V3 Leveling preserves the original ground clearance (or provides a minimal aesthetic correction of 5 to 15 mm). The protection of the battery tray remains 100% ensured, while Tesla’s high-voltage warranty remains unaffected because no electronic modifications are made.
Fitting a KW Leveling coilover kit to an electric car requires certified expertise. In our workshop at Riddererf in Nijkerk our technicians fit your suspension scratch-free on special EV lifts with rubber jack pads. After fitting we adjust rebound and bump to your preference and fine-tune the wheel alignment precisely on our computer-controlled 3D laser rig to prevent uneven tyre wear.
Would you like a KW V3 Leveling set fitted or do you have questions about the exact setup for your Model Y? Provide your registration number and variant; our suspension specialists will advise you directly.
We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".