For fans of American classics, rumbling V8 muscle cars, classic hot rods and modern Pro-Touring projects there is one wheel profile that has dominated the streets for well over sixty years: the timeless five-spoke American mag design with a deep, stepped chrome or polished rim. If you’re after the authentic look for a Ford Mustang, Chevrolet Camaro, Corvette, Dodge Charger or C10 pickup, you inevitably end up with the two titans of the American wheel industry: US Mags and American Racing[cite: 10].
Where American Racing with the legendary Torq Thrust helped define dragstrip and muscle car culture in the 1950s and 60s[cite: 10], US Mags (founded by Formula 1 and Le Mans driver Dan Gurney) has evolved into the favourite for clean Restomods, wide 17 to 20 inch set-ups and deep stepped-lip designs. In our workshop in Nijkerk our specialists regularly carry out fitment measurements and installations for classic American bolt patterns. In this comparison we list the technical properties, finishes, wheel-lug specifications and sizing in detail.
Both American manufacturers breathe V8 heritage, but each emphasises different things:
Founded in San Francisco by drag racer Romeo Palamides and J.O. Ellison. With the launch of the magnesium 'Torq Thrust' in 1956, American Racing defined the look of the hot rod and muscle car[cite: 10]. The brand offers a huge heritage in original period 14 and 15 inch sizes, as well as modern interpretations[cite: 10].
Founded in the 1960s by motorsport icon Dan Gurney to translate racing wins into street wheels. Today part of MHT Luxury Alloys, with a strong specialism in Pro-Touring builds: larger modern diameters, generous brake clearance and deep recessed wheel beds with refined high-gloss polishing.
Looking for a period-correct restoration with chunky 'fat tire' 15 inch tyres and the historic Torq Thrust signature[cite: 10]? Choose American Racing. Building a lowered Restomod with modern brakes, 17 to 20 inch wide sets and crisp stepped lips? Choose US Mags.
| Specification / Feature | US Mags | American Racing |
|---|---|---|
| Country of Origin & History | United States (1960s / Dan Gurney) | United States (1956 / Romeo Palamides)[cite: 10] |
| Flagship Models | Standard (U102/U107), Rambler (U111), Bandit (U109) | Torq Thrust D (VN105), Torq Thrust II (VN515), Ansen Slot[cite: 10] |
| Available Inch Sizes | 15", 17", 18", 20", 22" (Pro-Touring focus) | 14", 15", 16", 17", 18", 20" (Vintage & Modern)[cite: 10] |
| Construction Methods | Cast 1-Piece Aluminium & Custom Forged 2-Piece | Cast 1-Piece, 2-Piece Welded & Forged[cite: 10] |
| Classic Bolt Patterns (PCD) | 5x4.5" (5x114.3), 5x4.75" (5x120.65), 5x5" (5x127) | 5x4.5", 5x4.75", 5x5", 5x5.5" (Truck & Jeep) |
| Typical Finishes | Textured Gray with polished lip, Gloss Black Diamond Cut, Chrome | Classic Torq Thrust Gray, Vintage High-Gloss Chrome, Polished aluminium |
| Brake Caliper Clearance (Disc Brake Clearance) | Excellent (specifically designed for Wilwood / Baer brakes) | Good on larger sizes (15" wheels require checking for disc brake conversions) |
| Price Segment (Per Wheel) | Mid-range to Exclusive (€280 - €550 p/st) | Accessible to Mid-range (€220 - €480 p/st)[cite: 10] |
Correctly mounting wheels under American classics differs significantly from modern European vehicles:
In the American classic world offset is traditionally expressed in Backspacing (inches) rather than millimetre ET. Backspacing is the distance from the mounting face to the extreme rear edge of the wheel.
Example: A 15x8J wheel with a backspacing of 4.5 inch has an effective offset of approximately ET0. Our fitment specialists in Nijkerk convert American backspacing directly into exact wheelarch measurements.
Many classic V8 models are converted from original drum brakes to modern disc brakes. This often places the hub flange 5 to 10 mm further outboard and makes the brake caliper build thicker.
US Mags wheels (such as the Rambler) come from the factory with generous spoke clearance (X-factor) to accommodate large 4- or 6-piston calipers without the need for spacers.
A common mistake when fitting wheels to classic American cars is forcing metric wheel nuts onto inch-thread studs:
Classic American vehicles use wheel studs with inch threads, such as 1/2"-20 UNF (common on Ford and Mopar) or 7/16"-20 UNF (common on GM / Chevrolet). Forcing a metric M12x1.5 nut onto a 1/2" stud irreparably damages the thread.
Wheels 'N Customs supplies every set of US Mags and American Racing wheels with precisely fitting hardened conical wheel nuts (60° taper) in the correct inch thread, including matching thin-walled sockets to prevent paint damage in deep lug holes.
Fitting wheels to American V8 classics requires specific expertise in leaf springs, ball joints and drum brakes. In our workshop in Nijkerk we follow a strict inspection protocol[cite: 10]:
Don’t risk damaged chrome wheels, incorrect wheel stud threads or tyres rubbing in the wheel arch[cite: 10]. In our professional workshop at Riddererf in Nijkerk our experienced fitters mount exclusive American wheels, muscle car tyres and suspensions daily strictly according to official safety standards[cite: 10]. We take care of the complete technical fitment, perform a highly accurate 3D laser alignment and balance your set free of vibrations[cite: 10].
Are you torn between US Mags and American Racing, or do you want to know exactly which backspacing, J-width and inch wheel nuts are required for your V8 muscle car[cite: 10]? Our fitment specialists will calculate it precisely for you.
We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".