Car Insurance & Modifications: What Are You Required to Declare?

Wheels 'N Customs Icon
WHEELS 'N CUSTOMS
LEGAL & INSURANCE: DUTY TO DISCLOSE, RIGHT OF RECOURSE & POLICY CONDITIONS

Car Insurance & Modifications: What Are You Legally Required to Declare?

Personalising a car with a high-quality coilover kit, a hand-built exhaust system, exclusive alloy wheels or a Maxton Design aerodynamic kit significantly enhances driving pleasure and aesthetics. However, few car enthusiasts consider the legal relationship between their modifications and their car insurance. Many drivers silently assume that as long as a car passes the APK, the insurer will automatically pay out after an accident. This is a dangerous misconception.

Insurers base their risk assessment and monthly premium on the vehicle’s exact factory and registration specifications. If, after taking out the policy, a major change is made to the suspension, the power output or the bodywork without declaring it in writing, the company may, in the event of a serious collision, invoke non-disclosure or aggravated risk. In the worst case this leads to a right of recourse, where the insurer recovers from you personally every last cent of the compensation paid to third parties. In this guide from Wheels 'N Customs in Nijkerk we clearly explain the duty to disclose, accessory cover and inspection criteria.

1. The Legal Basis: Duty to Disclose & Aggravation of Risk

The relationship between the insured and the insurer is legally enshrined in the Netherlands in the Civil Code:

Article 7:928 of the Dutch Civil Code (Duty to Disclose)

The policyholder is obliged, before concluding the contract — and in the event of any material changes in the interim — to disclose all facts that may affect the insurer’s willingness to accept the risk on those terms.

Aggravation of Risk

When you increase engine power (chiptuning) or radically alter the suspension, an insurer deems the likelihood of an accident to increase. If you fail to report this, you are effectively driving around with a policy based on incorrect assumptions.

Increase in Value (Theft Risk)

A car with an exclusive multi-piece forged wheel set or a complete exhaust system represents a much higher theft and break-in value. Without registration, an All-risk or Limited Casco insurance only pays out the standard list value.

2. Notification Matrix: Modifications, Obligations & Consequences

Modification Type Obligation to Notify Insurer? RDW Inspection Required? Consequence if Not Reported
Alloy Wheels (Aftermarket) Recommended (for accessory cover) No (provided max. 30 mm protrusion & clearance) No compensation for theft above standard limit
Coilover Kit or Lowering Springs Yes (change to driving characteristics) No (provided TÜV-compliant and APK-safe) Investigation into causal link in a single-vehicle accident
Chiptuning (> 20% power increase) Mandatory (strict acceptance criterion) Yes (legally required to be re-inspected by RDW) Complete policy voidance & right of recourse in case of serious injury
Sports Exhaust (ECE-approved) Recommended (value cover) No (provided E-mark & within registration limit) No payout of the exhaust’s value in a rear-end collision
Bodykit (Splitters, Diffusers, Spoilers) Recommended (accessory cover) No (provided no sharp edges, ABE/TÜV) Compensation based on standard plastic OEM bumper

3. The Danger of the Right of Recourse: Personal Liability after a Crash

The biggest financial risk of undeclared or defective modifications is not a refused payout for your own bodywork damage, but the so-called right of recourse of the WAM insurer:

How Does the Right of Recourse Work?

Under the Motor Insurance Liability Act (WAM), your insurer is obliged to compensate any damage you cause to third parties directly to the victim.

However: if the loss assessor discovers that the car did not technically meet the approval requirements or that there was a deliberate concealment of risks, the company turns against you. The insurer reclaims the entire amount from you personally through the courts.

The Causal Link in Loss Investigations

In serious accidents involving injury or high material damage, the insurer initiates an in-depth technical forensic investigation. They will look at:

  • Was the coilover kit professionally installed and correctly 3D aligned?
  • Did the tyres rub in the wheel well due to an incorrect ET value or lowering?
  • Does the car have more power than registered, causing the brakes to fall short?

4. Accessory Cover & Valuation (Article 7:960 Dutch Civil Code)

Many car enthusiasts invest thousands of euros in styling and hardware. How do you ensure these parts are actually reimbursed in case of theft or total loss?

Prevent Underinsurance with Exclusive Upgrades

Standard policies often apply a maximum accessory limit of € 1,000 to € 2,500. A complete set of Concaver wheels with premium-brand tyres and TPMS already exceeds this limit. If the wheels are stolen from under your car, the insurer will pay out no more than the capped policy amount.

The Solution: Submit all installed invoices in writing to your broker to increase accessory cover.

For heavily tuned projects or cars with more than € 10,000 in modifications, we recommend an official valuation in accordance with Article 7:960 Dutch Civil Code by a recognised sworn loss assessor. The appraised value is then fixed for 3 years, regardless of the standard market value according to the price guide.

5. Modifications that Insurers Scrutinise More Strictly

Power & Exhaust (High-Risk Category):
Insurers often require additional security or decline cover
Chiptuning / Stage 1 & 2 on hot hatchbacks (VW Golf GTI/R, Audi S3, BMW M140i) • Downpipes without a catalytic converter or with OPF delete • Pops and bangs software • Increased top speed (V-Max unlock) on fast saloons and supercars.
Chassis & Safety (Inspection Category):
Focus on soundness, resistance to failure, and geometry
Installation of air suspension (airride) • Extreme lowering where there is no suspension travel • Spacers without hub-centric locating • Non-approved universal camber plates without TÜV • Wheel-tyre combinations with excessive tyre pressure or extreme tyre stretch.

Choose Certainty: Certified Installation in Nijkerk

Do you want to be able to demonstrate that your sports suspension, exhaust system or body kit has been installed to the highest safety standards? In our professional workshop at Riddererf in Nijkerk, our experienced technicians install parts daily strictly in accordance with the official German TÜV NORD guidelines. We always provide detailed installation invoices specifying the certification mark, perform computer-controlled 3D laser alignments and check clearance under full axle load, so your insurance cover is never in doubt.

Do you have questions about the approval or installation of your modifications?

Contact our workshop in Nijkerk for expert advice on approved TÜV/ECE parts, or book a safe installation session on our workshop lift right away.

 

We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".

wheelsandcustoms.nl