The KW V3 coilover kit (Variant 3 Inox-Line) is regarded worldwide as the absolute benchmark for sporty road cars, track day specials and high-performance EVs. Unlike simpler coilovers that are only height-adjustable (KW V1) or offer a combined firmness adjustment (KW V2), the KW V3 features patented independently adjustable compression and rebound valves. This means you can fine-tune the damper’s inbound and outbound stroke completely independently of each other.
Yet many drivers are on the road with an incorrectly adjusted suspension: the car bounces over transverse ridges, feels nervous on wet surfaces, or wallows after speed bumps. This is because people turn the adjusters ‘by guesswork’ without understanding the underlying physics. In this official guide from the suspension specialists at Wheels 'N Customs in Nijkerk we explain exactly what rebound and bump do, how KW’s two-way system works, and which baseline settings guarantee optimal grip and comfort.
A shock absorber controls the speed at which the spring moves. Without a damper, a car would continue to bounce uncontrollably for minutes after every bump. KW V3 splits this task into two targeted forces:
What it controls: The resistance when the damper extends again after the spring has been compressed.
Influence on the car: Outbound damping connects the body to the road surface. It controls body roll when turning in, dive under braking, squat under full throttle and after-bounce after crests. Too much rebound pulls the car down and makes it harsh; too little rebound makes the car floaty and unstable at speed.
What it controls: The resistance when the wheel rolls over an obstacle and the damper compresses.
Influence on the car: Inbound damping determines how much force is passed directly to the tyre and chassis. It absorbs ridges, manhole covers and speed bumps and generates mechanical grip. Too much bump makes the tyre skip over bumps; too little bump lets the suspension blow through its travel too quickly under heavy cornering forces.
| Usage Profile | Rebound Front Axle (Outbound) | Rebound Rear Axle (Outbound) | Bump Front | Bump Rear |
|---|---|---|---|---|
| Comfortable Street Use | 11 – 12 clicks open | 12 – 13 clicks open | 7 clicks open | 7 – 8 clicks open |
| KW Factory Baseline Setting | 9 clicks open | 9 – 10 clicks open | 6 clicks open | 6 clicks open |
| Sporty Street / Mountain Passes | 7 – 8 clicks open | 7 – 8 clicks open | 5 clicks open | 5 clicks open |
| Circuit / Trackday (Firm) | 4 – 6 clicks open | 5 – 6 clicks open | 3 – 4 clicks open | 3 – 4 clicks open |
The most common mistake when adjusting a KW coilover kit is counting from the soft setting. KW dampers are always adjusted from position 0 (fully closed):
Turn the adjuster clockwise (towards the + symbol). Stop as soon as you feel light resistance. Never force it past this point; this is Position 0 (maximum damping).
Turn the wheel anti-clockwise (towards the - symbol). Count every distinct click accurately. 9 clicks open means the internal needle is 9 steps away from the seat.
Ensure left and right on the same axle always have exactly the same number of clicks. A difference of 2 clicks between left and right can already cause instability under hard braking.
Prefer not to risk incorrect damper settings, damaged adjusters or uneven tyre wear? In our professional workshop at the Riddererf in Nijkerk, our experienced technicians install KW coilover kits, lowering springs and high-quality suspension systems daily, strictly according to the official German factory standards. We set the base clicks precisely to your driving profile and carry out a pin-sharp computer-controlled 3D laser alignment to bring camber and toe perfectly into harmony.
Do you need help finding the perfect damper setting for your car, or would you like professional installation including 3D laser alignment carried out in our workshop in Nijkerk? Our suspension and track day experts are ready to help.
We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".