Anyone who regularly takes their sports car or hot hatch to the track (such as Circuit Zandvoort, TT Circuit Assen or the Nürburgring Nordschleife) will soon encounter the physical limits of the standard suspension. Even with a high-quality coilover set the outer shoulders of semi-slicks wear away quickly after a few laps, while the front axle slides over the front wheels (understeer). The ultimate motorsport solution to counter this is fitting adjustable camber plates with solid uniball topmounts (known from suspensions such as the KW Clubsport and ST XTA).
However: motorsport technology always has a downside. Replacing the compliant rubber factory top mounts with rigid aluminium and steel spherical bearings drastically changes the car's character. In our workshop in Nijkerk we build trackday racers and fast road cars every week. Customers always ask us: "How much faster will I be on track, and how much comfort will I sacrifice during daily commuting?" In this technical guide we dissect the geometric advantages, the increase in NVH (Noise, Vibration, Harshness), tyre wear and the ideal camber settings.
When a car enters a corner at high speed, enormous lateral forces occur that deform the wheel and tyre:
Factory cars are set up with a neutral camber (approximately -0.5° to -1.0°) for straight-line stability and even wear. In a fast corner the body rolls, causing the outside tyre to tilt outward (positive dynamic camber). The tyre rolls on its extreme shoulder, the contact patch is halved and grip is lost.
With adjustable camber plates you move the top of the strut inwards, causing the wheels to lean in at rest (for example -2.5° to -3.2°). When the body rolls in the corner, centrifugal force presses the tread exactly flat on the tarmac.
Because the entire tread of the semi-slick is used, the tyre heats evenly across its full width. The outer shoulders no longer overheat, understeer disappears and cornering speed increases dramatically.
| Property / Feature | Aluminium Camber Plates (Uniball) | Original Rubber Top Mounts (OEM) |
|---|---|---|
| Camber Adjustability | Continuously adjustable (approx. -1.0° to -4.0°) | Not adjustable (fixed factory value approx. -0.5°) |
| Mount Construction | Steel spherical joint (motorsport uniball) | Cast rubber block with internal bearing |
| Steering Precision & Feedback | Razor-sharp; direct response without elastokinematic delay | Damped; the rubber deforms first when steering |
| Noise & Vibration Damping (NVH) | Very raw; cobbles, stone chips and ridges heard directly | Excellent; filters out shocks and resonance |
| Tyre Wear on Track | Completely even; outer shoulders remain preserved | Outer shoulders bald within 1 to 2 trackdays |
| Tyre Wear on the Motorway | Accelerated wear on the inner shoulder at > -2.5° | Perfectly even across the entire tread |
| Typical Application | Trackday, Nürburgring, Clubsport & Time Attack | Daily commuting and comfortable road cars |
In racing only lap time matters. On public roads comfort also counts. Those who choose uniballs consciously give up in three areas:
Flinging gravel in the wheelarches, the mechanical movement of the damper piston and the rolling sound of semi-slicks are transmitted directly through the solid metal to the strut tower and the inner bulkhead of the interior.
Micro-unevenness in the road surface (such as cobbles, transverse joints and ribbed asphalt) is no longer damped by a rubber buffer. You feel every centimetre of the road immediately through the steering wheel and the body structure.
Hard impacts — such as a manhole cover, a sharp speed bump or a lip at bridge transitions — arrive dry and harsh. The feeling of a smooth ‘luxury’ ride disappears and gives way to a pure race-car sensation.
To prevent an unusable car or bald tyres within 5,000 km, our suspension technicians in Nijkerk follow strict guidelines during 3D laser alignment:
Fitting adjustable camber plates requires the utmost precision on the lift. Our experienced fitters at Riddererf in Nijkerk regularly install KW Clubsport, ST XTA and Millway camber plates to official factory standards. We check the free travel of the strut, ensure the correct spring preload and set the wheel geometry accurately on our computer-controlled 3D laser bench, tailored to your specific tyre choice and circuit requirements.
Not sure whether camber plates are suitable for your intended use, or would you like to make an appointment for a professional bespoke 3D laser alignment at our workshop in Nijkerk? Our chassis specialists are happy to advise you.
We use cookies to optimise your user experience, analyse web traffic and for marketing purposes. If you agree to our use of cookies, click "Allow cookies".